The Casimir force decided to create free energy, the midichlorians excluded

The amplification process is similar to that used in quantum cascade lasers. In these systems, electrons flow from one point to another with equal energy. But in their new environment, they quickly lose energy (via sound waves produced by crystalline materials that hold electrons), which traps them there. This is a real system based on well established physics. It depends, however, on the actual material and the actual construction. So, it’s probably not what’s going to happen in the device, either.

If you measure, you get numbers

However, the company claims to have developed a device and measured the voltage drop between the plates and the poles. The company also says that these lights are predicted in a paper that seems to have no predictions, which is essential for success.

I wonder if Casimir, Inc. they would not have measured the potential difference. For ten years, material things were a problem in my life. Crystals are not simple and can show all kinds of strange properties due to missing atoms, crystalline boundaries, and impurities from manufacturing processes. If the group Casimir, Inc. it chose the right metal and the pillars were thin enough, they would have been completely oxidized by exposure to air, making them very different from the plates next to them. All of these factors contribute to the creation of measurable properties by research, independent of special Casimir forces or vacuum fluctuations.

But let’s give the company the benefit of the doubt and assume that it will see (or has already seen) the flow of electrons from the plates to the pillars due to the Casimir force – it is unlikely. Electrons still need to be manipulated by a charge in order to lose their energy. This means connecting the pillars and plates to the wires, which will cause the difference that may exist due to the contact between the different metals. To deal with the difference, the value must be stacked in columns. This will reduce the gap between the pillars and the plate and reduce the tunneling current.

Eventually, the entire charging pump will stop, without stopping the current flow. In other words, I hope that no useful energy will be released. But I appreciate the company’s work in burning a lot of VC money.

Related paper: Physical Assessment Research2026: 10.1103 / l8y7-r3rm